·描述：
1.这套高端离线小拉机是由我们全球一流的大客户特别定制的。
2.若进线直径小于φ1.25 mm，出线直径应相应地减小以保持最大线速度，否则线速度小于1800m/min。
3.仅规格为Ф630xФ335xФ127x400mm的这种线盘适用于收线。
4.所有拉丝和收线电机均采用西门子生产的。
·参数：
| inlet wire | max ø1.25mm | |
| 进线 | ||
| outlet wire | ø0.4mm | |
| 出线 | ||
| speed | max1800 m/min | |
| 速度 | ||
| mechanical reduction | interior：15% | |
| 机械减面率 | outlet：15% | |
| power supply | three-phase, 380V, 50Hz | |
| 电源 | ||
| air supply | 0.5 MPa | |
| 气源 | ||
| pay-off bobbin size | Ф630xФ335xФ127x400mm | |
| 放线线盘尺寸 | ||
| pay-off bobbin clamped method | centred and locked | |
| 放线线盘夹紧方式 | 两中心顶紧并防转动 | |
| pay-off bobbin loaded and unloaded method | Loaded：manually rolled onto the tray then automatically loaded by the tray. Unloaded：automatically unloaded by the tray then manually rolled off the tray. | |
| 放线线盘装卸方式 | 手动将线盘滚动到托盘上，再由托盘自动送入。由托盘自动送出，再手动将线盘从托盘滚下。 | |
| pay-off motor | 3KW, 1450rpm, I=9.7, gear motor, Siemens | |
| 放线电机 | 3KW, 1450rpm, I=9.7,齿轮电机，西门子 | |
| dies Qty | 13 pcs（8 pcs for spare） | |
| 模具数量 | 13个（空出8个） | |
| drawing method | full immersed, slip drawing, horizontal 6 bearings | |
| 拉丝方式 | 全浸式，滑动拉伸，水平6轴 | |
| capstan | interior：2sets, 4pcs/set, outlet：1set, 2pcs/set | |
| 拉丝轮 | ||
| drawing motor | 22KW, 1450rpm | |
| 拉丝电机 | ||
| driving method | motor to machine：V belt drive,machine interior：chain drive, machine interior to outlet: flat belt | |
| 传动方式 | 电机到拉丝机：V带传动，拉丝机内部：链传动，拉丝机内部到出口部分：平带传动 | |
| speed control method | speed preset and feedback from tachometer wheel | |
| 速度控制方式 | 速度预设和测速轮反馈 | |
| take-up bobbin size | Ф630xФ335xФ127x400mm | |
| 收线线盘尺寸 | ||
| take-up bobbin clamped method | centred and locked | |
| 收线线盘夹紧方式 | 两中心顶紧并防转动 | |
| traversing method | traversing forward and backward, drove by servo motor | |
| 排线方式 | 伺服驱动丝杠正反排线 | |
| take-up control method | balanced tension control | |
| 收线控制方式 | 平衡张力控制 | |
| take-up bobbin loaded and unloaded method | Loaded：manually rolled onto the tray then automatically loaded by the tray. Unloaded：automatically unloaded by the tray then manually rolled off the tray. | |
| 收线线盘装卸方式 | 手动将线盘滚动到托盘上,再由托盘自动送入;由托盘自动送出,再手动将线盘从托盘滚下 | |
| take-up motor | 18.5KW, 1450rpm | |
| 收线电机 | ||
